70L DUAL CHAMBER COMPOSTER - ASSEMBLY

Welcome to our digital assembly instructions! Scroll the images to the right and follow the steps

1 of 2

4 – A
2 – B
10 – C
1- D
2- E
2 – F
1 – G
2 – H
10 – I
12 – J
2 – K
2- L
6 – M
2- N

Collect 5 units of part C and the 5 green I parts

insert part I into part C

Make sure the part in secure

Repeat with 5 panels

Collect all the connectors (Part J)

Bend each part outwards, to make it wider

Place 2 panels next to each other- the arrows should point in the same direction

Assemble two panels together- the tabs slide to the inner part of the panels

Turn the panels towards the inside

Hold the two panels together

Insert one side of the connector through the crack. Push the connector towards the panel. It will widen and connect

Assemble the third panel. Make sure the marked arrows are pointing at the same direction

connect with the connector

continue with all 5 panels. Make sure the marked arrows are pointing to the same direction

open the door on the door panel (B)

Assemble the door panels so the door open to the opposite side from the marked arrows

Connect with J connectors on both sides of the door panel

Repeat on the second end

Place part A on top of the structure

Use force to connect the panels to the part

Flip the container

Assemble the second A part

Build the second container by repeating steps 1-21

Place the containers so the doors opens towards the outside

Collect parts D, H , L and N

Slide part H into part D. Adjust the drill hols to be aligned

Insert part L through the pipe

Adjust the drill hols to be aligned

Screw part N through the drill holes of part D, H and L – copy

Slide part D through the green container axis holes. Insert the axis from the direction the container door opens to

Collect part K

Slide part K on part D, the narrow lip facing the container

Make sure the part is placed all the way through, and that the lip is inserted inside the container

Slide the second part K on part D, the wide lip facing the container

Slide the second container on the axis

Make sure the axis goes all the way through

Flip the composters on their side, the green container facing down

Insert part H on the pipe. Adjust the drill hols to be aligned

Insert part L through the pipe. Adjust the drill hols to be aligned

Screw part N through the drill holes of part H and L

Collect parts F and part E

Slide green part F on the leg

Align the bottom drill hole on part F with the drill hole of part E

Screw part M through part F and E

Repeat yellow part F on the other part of the leg

Turn the holes on part H upwards

Insert the leg through part H holes on both sides

Insert the second leg through part H holes on both sides

Collect 4 small screws (part M)

Align the drill hole on each leg with the drill holes on part H

Screw the small screws (M) through the drill holes of part H and D

repeat on both sides

Flip composter into upright position

Insert the edges of part G to the center holes on part E

How was your assembly?

HOW WAS THE ASSEMBLY PROCESS?

CONFUSING

GREAT

Review

Thank you! we were wondering if you could leave an honest review.
to submit your review please select the website where you made your purchase:

REVIEW

Please let us know where we can improve

Composting information and tips!

In order for compost to be efficient, it requires a correct mixture ratio of “brown”(carbon) and “green” (nitrogen) materials. Water should be added only when necessary and the tumbler should be turned…

70L DUAL CHAMBER COMPOSTER - ASSEMBLY

Composting information and tips!

Join Miracle-Gro composting club