105L SINGLE CHAMBER COMPOSTER - ASSEMBLY

Welcome to our digital assembly instructions! Scroll the images to the right and follow the steps

1 of 2

2 – A
1 – B
5- C
2- D
1 – E
4 – F
6 – G
5 – H
1 – I
2 – J
2 – K
2- L
1 – M

Collect 5 units of part C and the 5 green F parts

insert part F into part C

Make sure the part in secure

Repeat with 5 panels

Collect all the connectors (Part G)

Bend each part outwards, to make it wider

Assemble two panels together- the tabs slide to the inner part of the panels

Turn the panels towards the inside

Hold the two panels together

Insert one side of the connector through the crack. Push the connector towards the panel. It will widen and connect

Assemble the third panel

connect with the connector

continue with all 5 panels

Assemble the door panel (C)

Connect with G connectors on both sides of the door panel

Repeat on the second end

Place part A on top of the structure

Use force to connect the panels to the part

Flip the container

Assemble the second A part

Collect parts E, L, J and K

Slide part L into part E. Adjust the drill hols to be aligned

Insert part J through the pipe

Adjust the drill hols to be aligned

Screw part K through the drill holes of part J, E and L

Slide part E through the container axis holes

Slide part L into part E. Adjust the drill hols to be aligned

Insert part J through the pipe. Adjust the drill hols to be aligned

Screw part K through the drill holes of part J, E and L

Collect part D, M and 1 unit of part H

Slide yellow part M on the leg

Align the bottom drill hole on part D with the drill hole of part M

Screw part H through part D and M

Turn the holes on part L upwards

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Insert the leg through part L holes on both sides

Collect the second part D

Insert the leg through part L holes on both sides

Collect 4 small screws (part H)

Align the drill hole on each leg with the drill holes on part L

Screw the small screws (H) through the drill holes of part L and D

repeat on both sides

Flip the composter

Insert the edges of part I to the center holes on part D

How was your assembly?

HOW WAS THE ASSEMBLY PROCESS?

CONFUSING

GREAT

Review

Thank you! we were wondering if you could leave an honest review.
to submit your review please select the website where you made your purchase:

REVIEW

Please let us know where we can improve

Composting information and tips!

In order for compost to be efficient, it requires a correct mixture ratio of “brown”(carbon) and “green” (nitrogen) materials. Water should be added only when necessary and the tumbler should be turned…

105L SINGLE CHAMBER COMPOSTER - ASSEMBLY

Composting information and tips!

Join Miracle-Gro composting club